Convert DXE to STEP
| File Extension | DXE |
| Full Name | AutoCAD Data Extraction Template Format |
DXE file format is used by AutoCAD’s template generator tool. DXE files store extracted information regarding drawn objects and their properties. The file holds also information on the output format of the stored data (for example, spreadsheet data format).
| File Extension | STEP |
| Full Name | ISO-10303 STEP Product Data |
The .STEP extension belongs to files of the type, STEP 3D models, which is a standard format for the exchange of product data. The format is also recognized by the ISO as a standard with the number ISO 10303. Informally refered to as STEP, the format is used widely for exchanging data that originates from CAD software for 3D product and modeling.
What is file format conversion?
File format conversion is the process of transforming a file from one format (referred to as "DXE") to another (referred to as "STEP"). This may be necessary for various reasons. For example, DXE file may be incompatible with the software or device we want to use to open or edit it. In such cases, converting the file from format DXE to format STEP becomes essential.
So, how can we perform DXE to STEP file conversion? Fortunately, there are many tools and computer programs available that enable file format conversion. These tools work by reading the data from the file in format DXE and transforming it into format STEP. This allows the preservation of the original information contained in the file, even after changing its format. Below you will find a list of DXE to STEP converters.
Conversion from DXE to STEP
DXE to STEP
How to convert the DXE file to STEP?
If you have already downloaded one of the converters and installed it on your computer, you can proceed to the appropriate conversion process of DXE to STEP. Handling all the programs is usually very intuitive and is based on the same pattern of conduct. We will briefly discuss a few steps that you always need to go through while changing the format of the DXE file:
- Please indicate on your computer the source file DXE, the format of which you are going to change
- Load the DXE file to the application
- Select the output format of the STEP file (the one that we want to achieve)
- Select the location to save the output file STEP on the disk (the place where the program will save the converted file)
- Confirm conversion
- Wait for a moment
- Enjoy the converted STEP file that can be found in the location selected in step 4
Other conversions
from the DXE format:
Other conversions
to the STEP format:
- BIP to STEP
- BRD to STEP
- CATPART to STEP
- CATPRODUCT to STEP
- DAE to STEP
- DFT to STEP
- DGN to STEP
- DRW to STEP
- DWF to STEP
- DWFX to STEP
- DWG to STEP
- DXF to STEP
- EASM to STEP
- EDRW to STEP
- FBX to STEP
- FCSTD to STEP
- IAM to STEP
- ICS to STEP
- IFC to STEP
- IGS to STEP
- IPT to STEP
- IV to STEP
- JT to STEP
- LWO to STEP
- MODEL to STEP
- PAR to STEP
- PLY to STEP
- PRT to STEP
- SAT to STEP
- SKP to STEP
- SLDASM to STEP
- SLDDRW to STEP
- SLDPRT to STEP
- SPT to STEP
- 3DS to STEP
- OBJ to STEP
- 3DXML to STEP
- X_T to STEP
- SVG to STEP
- TCW to STEP
- VRL to STEP
- VRML to STEP
- WRL to STEP
- X_B to STEP
- 3D to STEP
- NC1 to STEP
- XGL to STEP
- RVM to STEP
- AD_ASM to STEP
- SCDOC to STEP
- AD_PRT to STEP
- A3D to STEP
- XMT_TXT to STEP
- STL to STEP
- AI to STEP
- EPS to STEP
- ASC to STEP
- MAX to STEP
- C4D to STEP
- IGES to STEP
- 3DM to STEP
- SLP to STEP
- ASM to STEP
I cannot see the file extensions. What should I do?
File extensions are not normally displayed to users. To change this, go to Control Panel, select Appearance and Personalization and Folder Options. Next, select the View and find the option "Hide extensions for known file types". The option should be deselected (cleared) and confirmed with OK.