Convert DXF to IGS
| File Extension | DXF |
| Full Name | AutoCAD DXF Drawing Exchange Format |
The extension .dxf belongs to the files of the type drawing exchange format files. These are the files that store graphical data in a digital format and often the output formats of Computer Aided drawing tools. The file is used mostly for the vector image files that are rendered using the Autodesk Software tools.
| File Extension | IGS |
| Full Name | IGES ASCII CAD Format |
The .igs file extension stands for IGES drawing file. This is a special type of 2D/3D vector graphic file which is based on the Initial Graphics Exchange Specification. This file is not vendor specific and thus allows more software to put it as their standard output format for the 2D and 3D models.
What is file format conversion?
File format conversion is the process of transforming a file from one format (referred to as "DXF") to another (referred to as "IGS"). This may be necessary for various reasons. For example, DXF file may be incompatible with the software or device we want to use to open or edit it. In such cases, converting the file from format DXF to format IGS becomes essential.
So, how can we perform DXF to IGS file conversion? Fortunately, there are many tools and computer programs available that enable file format conversion. These tools work by reading the data from the file in format DXF and transforming it into format IGS. This allows the preservation of the original information contained in the file, even after changing its format. Below you will find a list of DXF to IGS converters.
Conversion from DXF to IGS
How to convert the DXF file to IGS?
If you have already downloaded one of the converters and installed it on your computer, you can proceed to the appropriate conversion process of DXF to IGS. Handling all the programs is usually very intuitive and is based on the same pattern of conduct. We will briefly discuss a few steps that you always need to go through while changing the format of the DXF file:
- Please indicate on your computer the source file DXF, the format of which you are going to change
- Load the DXF file to the application
- Select the output format of the IGS file (the one that we want to achieve)
- Select the location to save the output file IGS on the disk (the place where the program will save the converted file)
- Confirm conversion
- Wait for a moment
- Enjoy the converted IGS file that can be found in the location selected in step 4
Other conversions
from the DXF format:
- DXF to 3D
- DXF to 3DMAP
- DXF to 3DS
- DXF to AC
- DXF to AI
- DXF to ART
- DXF to ASC
- DXF to ASE
- DXF to BLEND
- DXF to CAD
- DXF to CAL
- DXF to CATDRAWING
- DXF to CATPRODUCT
- DXF to CDR
- DXF to CGM
- DXF to CGR
- DXF to CNV
- DXF to CSM
- DXF to CVX
- DXF to DFT
- DXF to DGN
- DXF to DRW
- DXF to DRWDOT
- DXF to DST
- DXF to DSZ
- DXF to DTD
- DXF to DWF
- DXF to DWFX
- DXF to DWG
- DXF to EASM
- DXF to EDRW
- DXF to EMS
- DXF to EXB
- DXF to EXP
- DXF to FBX
- DXF to FCSTD
- DXF to FLT
- DXF to GBR
- DXF to GERBER
- DXF to GT
- DXF to HPG
- DXF to HPGL
- DXF to IAM
- DXF to IDW
- DXF to IFC
- DXF to IGES
- DXF to IPN
- DXF to IPT
- DXF to KMZ
- DXF to LAY
- DXF to MODEL
- DXF to NC
- DXF to NC1
- DXF to OBJ
- DXF to ODG
- DXF to OFF
- DXF to PAR
- DXF to PCB
- DXF to PRT
- DXF to PS
- DXF to PSM
- DXF to SAT
- DXF to SCAD
- DXF to SHE
- DXF to SKP
- DXF to SLDDRW
- DXF to SLDPRT
- DXF to SLP
- DXF to STEP
- DXF to STL
- DXF to STP
- DXF to SVG
- DXF to SXE
- DXF to TAP
- DXF to VRML
- DXF to VSS
- DXF to VSSX
- DXF to VWX
- DXF to XXX
- DXF to X_T
Other conversions
to the IGS format:
- DAE to IGS
- HPG to IGS
- ASAT to IGS
- ASC to IGS
- CATPART to IGS
- CATPRODUCT to IGS
- CGR to IGS
- DFT to IGS
- DGN to IGS
- DWF to IGS
- EASM to IGS
- FCSTD to IGS
- IDW to IGS
- IFC to IGS
- 3DS to IGS
- DWG to IGS
- OBJ to IGS
- STEP to IGS
- STL to IGS
- 3DXML to IGS
- PRT to IGS
- SLDPRT to IGS
- STP to IGS
- IPT to IGS
- JT to IGS
- MAX to IGS
- PAR to IGS
- SAB to IGS
- SAT to IGS
- TCW to IGS
- U3D to IGS
- VDA to IGS
- VRL to IGS
- VRML to IGS
- VWX to IGS
- 3DV to IGS
- NC1 to IGS
- XGL to IGS
- RVM to IGS
- A3S to IGS
- AD_PRT to IGS
- SHE to IGS
- 3DMAP to IGS
- CATDRAWING to IGS
- EPS to IGS
- FBX to IGS
- LWO to IGS
- X_T to IGS
- 3DM to IGS
- IAM to IGS
- SLDASM to IGS
- ICS to IGS
- WRL to IGS
- MCL to IGS
- ASM to IGS
- SHP to IGS
- SLDDRW to IGS
- X_B to IGS
I cannot see the file extensions. What should I do?
File extensions are not normally displayed to users. To change this, go to Control Panel, select Appearance and Personalization and Folder Options. Next, select the View and find the option "Hide extensions for known file types". The option should be deselected (cleared) and confirmed with OK.