Convert STL to CATPART
| File Extension | STL |
| Full Name | Stereolithography Format |
The .STL extension refers to files of the type, Stereolithography files. It is a native file format for CAD software that are based on stereolithography. There are many community developed and supported packages that work with the STL file and language for CAD.The STL file is mostly used for rapid prototyping and contains usually 3D modeling data.
| File Extension | CATPART |
| Full Name | CATIA Part Format |
File with a .CATPART extension contains geometric and structural data of a 3D model of a complete project of a product. As a result of connecting many CATPART files of a given product – a .CATPRODUCT may be created.
What is file format conversion?
File format conversion is the process of transforming a file from one format (referred to as "STL") to another (referred to as "CATPART"). This may be necessary for various reasons. For example, STL file may be incompatible with the software or device we want to use to open or edit it. In such cases, converting the file from format STL to format CATPART becomes essential.
So, how can we perform STL to CATPART file conversion? Fortunately, there are many tools and computer programs available that enable file format conversion. These tools work by reading the data from the file in format STL and transforming it into format CATPART. This allows the preservation of the original information contained in the file, even after changing its format. Below you will find a list of STL to CATPART converters.
Conversion from STL to CATPART
STL to CATPART
How to convert the STL file to CATPART?
If you have already downloaded one of the converters and installed it on your computer, you can proceed to the appropriate conversion process of STL to CATPART. Handling all the programs is usually very intuitive and is based on the same pattern of conduct. We will briefly discuss a few steps that you always need to go through while changing the format of the STL file:
- Please indicate on your computer the source file STL, the format of which you are going to change
- Load the STL file to the application
- Select the output format of the CATPART file (the one that we want to achieve)
- Select the location to save the output file CATPART on the disk (the place where the program will save the converted file)
- Confirm conversion
- Wait for a moment
- Enjoy the converted CATPART file that can be found in the location selected in step 4
Other conversions
from the STL format:
- STL to 3DS
- STL to 3DXML
- STL to A3D
- STL to A3S
- STL to AC
- STL to ASC
- STL to ASS
- STL to BDF
- STL to BREP
- STL to C4D
- STL to CATDRAWING
- STL to CATPRODUCT
- STL to CGR
- STL to DAE
- STL to DGN
- STL to DWG
- STL to DXF
- STL to EASM
- STL to EPRT
- STL to EPS
- STL to FBX
- STL to FCSTD
- STL to GBR
- STL to GERBER
- STL to GLB
- STL to IAM
- STL to IDW
- STL to IGES
- STL to IGS
- STL to IPT
- STL to IV
- STL to JPEG
- STL to JPG
- STL to JSON
- STL to JT
- STL to KMZ
- STL to LWO
- STL to LWOB
- STL to LXO
- STL to MAX
- STL to OBJ
- STL to OFF
- STL to PDF
- STL to PDO
- STL to PLY
- STL to PNG
- STL to PRT
- STL to PTS
- STL to SAB
- STL to SAT
- STL to SCAD
- STL to SKP
- STL to SLDASM
- STL to SLDPRT
- STL to SRT
- STL to SSA
- STL to STEP
- STL to STP
- STL to TCW
- STL to U3D
- STL to VRML
- STL to W32
- STL to WRL
- STL to XGL
- STL to XML
- STL to X_B
- STL to X_T
Other conversions
to the CATPART format:
I cannot see the file extensions. What should I do?
File extensions are not normally displayed to users. To change this, go to Control Panel, select Appearance and Personalization and Folder Options. Next, select the View and find the option "Hide extensions for known file types". The option should be deselected (cleared) and confirmed with OK.