File type | Xilinx Integrated Software Environment Bitstream Format |
Developer | Xilinx |
Ads |
BIT file is a binary file genereted by Xilinx software. It contains configuration data and header information used by BitGen. BIT files are used also by other Xilinx tools: iMPACT and PROMGen.
The main purpose of BIT files is generating bitstreams for field-programmable gate arrays (FPGA). FPGA architecture was designed by Xilinx, which supplied its devices for Mars missions (Spirit and Opportunity).
If you cannot open the BIT file on your computer - there may be several reasons. The first and most important reason (the most common) is the lack of a suitable software that supports BIT among those that are installed on your device.
A very simple way to solve this problem is to find and download the appropriate application. The first part of the task has already been done – the software supporting the BIT file can be found in the table. Now just download and install the appropriate application.
The inability to open and operate the BIT file does not necessarily mean that you do not have an appropriate software installed on your computer. There may be other problems that also block our ability to operate the Xilinx Integrated Software Environment Bitstream Format file. Below is a list of possible problems.
If you are sure that all of these reasons do not exist in your case (or have already been eliminated), the BIT file should operate with your programs without any problem. If the problem with the BIT file has not been solved, it may be due to the fact that in this case there is also another rare problem with the BIT file. In this case, the only you can do is to ask for assistance of a professional staff.
.a2l | ASAP2 Description Format |
.afd | Alphacam Flame Drawing Format |
.afs | STAAD.foundation Project Format |
.any | AnyRail Layout Plan Format |
.ard | ArtiosCAD Workspace Format |
.bbcd | BobCAD-CAM Document |
.bdl | CoCreate Designer Bundle Format |
.bit | Xilinx Integrated Software Environment Bitstream Format |
If you want to associate a file with a new program (e.g. my-file.BIT) you have two ways to do it. The first and the easiest one is to right-click on the selected BIT file. From the drop-down menu select "Choose default program", then click "Browse" and find the desired program. The whole operation must be confirmed by clicking OK. The second and more difficult to do is associate the BIT file extension to the corresponding software in the Windows Registry.
Many files contain only simple text data. It is possible that while opening unknown files (e.g. BIT) with a simple text editor like Windows Notepad will allow us to see some of the data encoded in the file. This method allows you to preview the contents of many files, but probably not in such a structure as a program dedicated to support them.